COPPER WIRE GRANULATOR  US TEL: 540 255 4909 CANADA: 705 443 7250 

Our range of copper wire granulators start at simple hand fed mills combined with an air bed separator to split the granulated copper from the plastic casing. These units come with either an air filters or more sophisticated cyclone air filtration systems. This type of unit is ideal for small users wanting to deal with typical household and smaller commercial cables. 
These units can be upgrade to be able to deal with fine hair wire such as data cable by adding a turbo device. Larger users can add a pre-shredder and intelligent conveyor to allow bulk feeding of the machine. The units simply get bigger the more capacity you require. 

Copper Granulator 

 
 
 
FILTRATION TYPE 
FILTRATION TYPE 
 
MODEL 
POWER KW 
CAPACITY KG 
FILTER 
CYCLONE 
TURBO 
SM1000STD 
7.5 
60-80 
 
 
SM1100STD 
80-100 
 
 
SM1200CYC 
8.5 
80-120 
 
 
SM2000T 
26 
170-250 
 
SM3000STD 
22 
200-300 
 
 
SM3000T 
38 
250-350 
 
SM5000STD 
28 
250-350 
 
 
SM5000T 
52 
350-500 
 
SM10000T 
90 
500-700 
 
X 
Notes: All these machines are hand feed - see below for bulk feed. STD machines have just the Mill, Sorting bed and air filtration. Turbo machines are required to process fine hair wire such as data cable. 

Pre- Shredder 

MODEL 
KW 
SM500/260 
11 - 15 - 22 
SM800/260 
15 - 22 - 30 
SM800/380 
45 - 55 
Notes: Pre- shredders allow the bulk feeding of the machine when combined with the conveyor. 

Conveyor 

TYPE 
DIMENSIONS 
NST 2000 
1700 x 600 x 1300 
NST 4000 
3400 x 600 x 1800 
Note: Conveyors can be fitted with magnets to remove steel particles from the shred mix. The conveyor is linked to the motor load to allow the pre-shred to be loaded at a rate defined by the mill. 
Our site uses cookies. For more information, see our cookie policy. ACCEPT COOKIES MANAGE SETTINGS